STEEL WHEEL 15'' 4X108 CITROEN C2, C3, C4, C5 PEUGEOT 26 207 308 406
16 YEARS OF EXPERIENCE
The Super Seller on Allegro.pl
SECURITY
The regulations meet the Trusted Shop quality criteria
QUALITY CERTIFICATE
Alloy wheels have ISO, VIA JWL certificates proving their high quality
GUARANTEED QUALITY
Aluminum Rims are covered by a 3-year warranty
STATIONARY SHOPS
Opportunity to look at the goods closely, direct contact with an expert
Steel rims in your car - choose a proven solution!
Steel rims have a large group of recipients and there are two reasons for this: economic and practical. These rims will work for drivers who are looking for a budget solution for their car. Steel rims together with winter tires are used as the second set of wheels . This is a very common solution - with the onset of winter, popular nibs rule the streets. So if you are looking for steel rims from a proven manufacturer , you've come to the right place!
Original Peugeot Citroen product
The rims were manufactured in France by MW (MW FR) on behalf of the PSA group (Citroen, DS, Opel, Peugeot, Vauxhall). The rims meet all the required European strength and quality standards, and combined with the low price, they are the perfect solution for your car for winter conditions. Each rim is packed in a separate company box, which protects the rim against damage. We do not guarantee compatibility with hubcaps . Enjoy your shopping.
When you buy this product, you will receive from us: ✅ 1 x new steel rim, ✅ 1 x valve, ❌ IMPORTANT! The set does not include bolts / nuts ➡️ accessories
TÜV and KBA certified
MW steel rims not only meet OE standards, but are also tested and certified by the German TÜV Certification Institutes and The German Federal Department of Motor Vehicles (KBA). TÜV and KBA certified rims meet the strictest quality criteria.
Rims with approval of car parts.
MW steel rims are approved for car parts throughout the European Union. It is a set of standards, regulations and technical requirements that applies to almost every part of the vehicle that has a significant impact on the safety of the vehicle while traveling on the road. Approval is a process of testing performed by authorized bodies. If the part receives a positive evaluation, it receives a certificate and the manufacturer may place the E mark and the code of the country where the part was approved (eg E1 - Germany, E22 - Russia) on the product in a visible place. The approval certificate confirms that the technical requirements have been met and is approved for road use.
Check the nibs before fitting the tires.
After receiving your order, check that the package contains all the products you have purchased. Accessories can be glued to the bottom of the carton or they can be in one of the four cartons.
At the very beginning, before assembly, check that the rims fit the car, do not have deviations, do not rub against the suspension elements and do not protrude beyond the wheel arch. Nibs should be tried on both axles of the vehicle. It is important to verify the goods BEFORE mounting the tires on the rims. The fitting of tires is unnecessary and will prevent the correct diagnosis of the product. If you visit a service / workshop, inform the vulcanizer to perform the above steps first.
It should also be remembered that the tolerance of the hole diameter is 0.3 mm. The central bore is tapered towards the outside. Only when the screws on the opposite sides are tightened , the rim is properly centered and the play is leveled.
Quality confirmed by customer opinions.
We receive numerous positive opinions from our customers in Trusted Shops and photos of cars on our rims, which are regularly published on our Facebook , Instagram and gallery website.
Since 2008, we have been selling steel rims, aluminum rims , TPMS sensors , assembly accessories. Our products, services and knowledge are used, among others, by authorized car repair shops all over Poland. There are already over 100,000 on the roads of Poland and Europe. cars fitted with our rims. It's time for YOU to trust us!
Read on the blog LadneFelgi.pl
Tech specs:
The model:determines the appearance of the rim. By entering the model in the LadneFelgi.pl store search engine, you can search for rims in different colors and with other parameters.
Size: is the diameter of the rim in inches (1 inch = 2.54 cm). Possible sizes are predetermined by the car manufacturer. It is not allowed to use smaller rims than provided by the manufacturer.
Rim width: is measured between the rim flanges. The dimension is in inches. When choosing tires, take into account the width of the rim and the car manufacturer's recommendations.
Wheel PCD: determines the number and spacing of mounting holes. This is the diameter of the circle with the centers of these mounting holes. The diameter of the circle is given in millimeters.
ET, offset: is not a strictly defined parameter, such as spacing. It depends on the width of the rim. ET is given in mm. The smaller the offset, the more the rim is, which increases the wheelbase, positively influencing the car's stability. The service book or ASO provides only the parameters of the currently installed rims.
Center bore: it is the dimension of the rim center hole diameter given in mm. If the car has a smaller hub diameter, centering rings are used. The ring is used to center the rim in relation to the car's hub. After screwing it, no force acts on it. It is a safe solution used by all rim manufacturers.
Color: determines the colors in which the offered item was made. Pictures are taken under natural lighting.
The working shape of the screw head, must correspond to the shape of the mounting hole made in the rim. We distinguish between spherical( spherical), conical or flat sockets for flat rim holes. The standard is a cone with an angle of 60 degrees