Methods of programming TPMS sensors

For a specific car model.

TPMS (Tire Pressure Monitoring System) is a set of sensors that monitor the tire pressure and inform the driver about a possible drop. You can find high-quality replacements that are in no way inferior to the TPMS sensors originally installed in your car. We have a professional programmer, thanks to which the sensors we offer can be programmed just for your car! It should be remembered that the sensors are not compatible with all cars. According to the manufacturer's list, the sensors cover approx. 95% of cars available on the market. Decide to buy TPMS sensors at LadneFelgi.pl, and our qualified employee will program them especially for you! There are two methods of programming TPMS sensors - assigning new ID numbers and copying original ID numbers. After placing the order, we recommend contacting the store staff in order to select the best programming method.

Assigning new ID numbers.

The first method of programming is to give the sensors new ID numbers, thanks to which we will create replacements for the currently used sensors. Here, the new ID numbers must be encoded in the control unit's memory. You activate them in different ways, depending on the model of your car:

• The first method of programming is to give the sensors new ID numbers, thanks to which we will create replacements for the currently used sensors. Here, the new ID numbers must be encoded in the control unit's memory. You activate them in different ways, depending on the model of your car:
• If your car does not have automatic learning, then nothing is lost! You have to upload the sensors and their ID numbers yourself. If you do not have the appropriate knowledge and equipment, you will have to go to an authorized service station or car workshop. There, the mechanic will connect to the car with a service computer via the OBD II connection and upload the sensors.
• Depending on the car model, after installing new TPMS sensors, you will have to perform a number of activities, e.g. locking the door with the key button and using the horn at the end of the procedure, pressing a combination of buttons on the dashboard.

Copying original ID numbers.

Cloning is the second method of programming TPMS sensors. In this case, the factory ID and clone ID are identical. To program, we will need unique ID numbers of your old sensors - each sensor has its own unique number. Give them to us when placing the order or send them by e-mail. We will upload the identification numbers so that your car does not know the difference between the old and new sensors.
Where do you get the ID numbers of your TPMS sensors? They can be read in three ways:

• From the car's on-board computer - you need to visit a workshop or an authorized service station. The mechanic will connect a computer to your car and read the numbers of the sensors.
• Using the TPMS programmer - ID numbers can be read wirelessly from the device for diagnosing TPMS sensors. Move the device close to the wheel and scan the data. If you don't have one, buy it in our store or go to a mechanic.
• From the TPMS sensor - the ID number can be read directly from the disassembled sensor. Unfortunately, this only applies to the original sensors. Replacements do not have stamped ID numbers because they can be programmed many times.

You can buy programmable TPMS sensors at LadneFelgi.pl.

When buying new pressure sensors for a car, remember that after installing them, they must be programmed. The store's offer includes TPMS sensors that are programmable at the customer's request by our employee. If you are looking for replacements for damaged or non-working sensors, you've come to the right place. Our sensors can also be used in the second set of wheels, for the summer or winter season, and will behave like the original ones. We invite for shopping!